CEILING BATTEN SYSTEMS – TARANAKI, NEW PLYMOUTH, WANGANUI & TAUMARUNUI

STRONG, RELIABLE SUPPORT FOR EVERY CEILING

When it comes to ceiling construction, Taranaki Steelformers delivers proven performance with our Ceiling Batten System — trusted by builders and contractors across the region for its strength, precision, and reliability.

Our Steelformers Ceiling Batten, C-Channel, and Clips are all manufactured using 0.55mm BMT G550 high tensile Galvsteel® sourced from New Zealand Steel, ensuring durability and compliance with AS 1397:2011. Designed and produced locally, our system is engineered to perform under New Zealand’s building standards and conditions.

 

Perfect for new builds and renovations, this system provides exceptional support for single-layer plasterboard ceilings in both timber and light steel-framed structures.

 

Get expert advice or a free quote today — call 0800 4 ROOFING (0800 4 766 346) to talk to the local ceiling batten specialists.

Our Ceiling Batten System is a tried and tested solution used extensively in new residential and commercial builds throughout Taranaki and beyond.


The system includes:

 

  • Ceiling Battens – Precision roll-formed for strength and consistency.
  • C-Channels – Designed for reliable load distribution and easy installation.
  • Clips – Engineered for secure fastening and long-term performance.

 

Each component is made from Galvsteel®, providing superior corrosion resistance and a clean, professional finish that stands the test of time.

 

Scope of Use:

The Steelformers Ceiling Batten System is suitable for directly supporting single-layer plasterboard ceiling linings in buildings within the scope of NZS 3604 or the NASH Standard Part 2 – Light Steel Framed Buildings. Always follow plasterboard manufacturer guidelines for installation to ensure compliance and performance.

22mm CEILING BATTEN 

The 22mm Ceiling Batten is a shallow trapezoidal steel section with the same double folded flanges and dimples surface as the 35mm Ceiling Batten. The 22mm Ceiling Battens are cut to your required lengths and can be direct fixed.​

35mm CEILING BATTEN 

The 35mm Ceiling Batten is a trapezoidal steel section with double-folded flanges and a dimpled surface which assists in preventing screw movement. Ceiling battens are cut to order (max. 10 m); simply provide us with the quantities of each length and the install location within the building. The ceiling battens will be supplied to your exact lengths and pre-labelled for easy, on-site identification.

C-CHANNEL 

The C-Channel is formed from the same 0.55 mm BMT Galvsteel® as the ceiling batten and is supplied in 6-metre lengths. We recommend screw fixing the C-channel to supporting framing at the perimeter of the room at 1200 mm maximum centres. Our C-Channel is compatible with our 35mm ceiling batten.

CLIPS 

The clips are pressed metal tabs, sourced locally in New Plymouth, and are manufactured from 0.95 mm BMT galvanised sheet steel. Clips are fixed to the sides of timber ceiling joists, truss chords or floor joists. The central fixing slot provides 25 mm of vertical alignment to achieve a level ceiling line.

FREQUENTLY ASKED QUESTIONS

  • WHAT IS THE CEILING BATTEN SYSTEM USED FOR?

    It’s designed to provide structural support for plasterboard ceiling linings, ensuring stability and strength in residential and light commercial builds.

  • WHAT MATERIAL IS USED IN THE SYSTEM?

    All components — the Batten, C-Channel, and Clips — are made from 0.55mm BMT G550 high tensile Galvsteel®, produced by New Zealand Steel for consistent quality and durability.

  • IS THE SYSTEM COMPLIANT WITH BUILDING STANDARDS?

    Yes. It fully complies with AS 1397:2011 and can be used within the framework of NZS 3604 or the NASH Standard Part 2 for light steel buildings.

  • CAN IT BE USED IN STEEL- OR TIMBER-FRAMED BUILDINGS?

    Yes, the Steelformers Ceiling Batten System is versatile and suitable for both timber and light steel-framed structures.

  • WHERE IS IT COMMONLY USED?

    This system is widely used in new homes, commercial builds, and renovations throughout Stratford, New Plymouth, Wanganui, and Taumarunui.

WHY CHOOSE TARANAKI STEELFORMERS CEILING SYSTEMS? 

Locally made from high-quality New Zealand steel.

Compliant with New Zealand building standards (NZS 3604 & NASH Part 2).

Custom fabrication is available for commercial and residential applications.

Simple installation and long-term reliability.

Trusted by builders across Taranaki, Wanganui, and Taumarunui.

Fast supply and delivery from our local network of branches.

For proven performance in every project, choose Taranaki Steelformers Ceiling Battens — precision-made, reliable, and ready to perform.

 

Contact us today on 0800 4 ROOFING (0800 4 766 346) for expert advice or a quote on your next build.

For strong, lightweight ceiling batten solutions, call 0800 476 346 and speak to our local experts.