STYLELINE
Styleline is one of the most stylish roofing and cladding profiles available due to its strong visual appeal and bold shape. Steelformers Styleline, a five rib trapezoidal profile, is light and strong finding immediate acceptance in both domestic and commercial markets. Add value to your home or building with this modern profile - specify Steelformers Styleline.
​
Our Styleline profile is available in a wide selection of materials with Alsynite polycarbonate and topglass available to match.
EFFECTIVE COVER 755MM
OVERALL WIDTH 810MM
3 cups
Flour
1½ cups
Butter
RIB HEIGHT 29MM
RIB TO RIB 187MM
PAN WIDTH 127MM
All profile dimensions are nominal
Specifications
-
Suitable for residential, commercial and industrial roofing, cladding and internal lining applications
-
Available in 0.40mm (G550) and 0.55mm BMT (G550/G300) ZINCALUME®, GALVSTEEL®, COLORSTEEL® ENDURA® AND MAXX®, COLORSTEEL® DRIDEX® and DRIDEX®+, Mill finish 0.9mm aluminium, ColorCote® AlumiGard (available on request, conditions apply)
-
In accordance with Acceptable Solution E2, the minimum roof pitch for Steelformers Styleline is 3°
-
Rollformed in our Stratford factory
-
Sheet lengths are custom run to order
-
Bull nose options are available through our Stratford factory
Fastenings & Fixings
It is important to select the correct fasteners for your application. The fasteners must be class 5 minimum, their durability is at least equal to the durability of the material and all screws have a neoprene washer and in some cases a load-spreading washer and EPDM.
The NZMRM Code of Practice provides information on selection, fixing methods and patterns according to wind zones.
Maximum Spans
The following chart shows the maximum permissible purlin spacing (span) for Styleline G550 (under 1km concentrated load).
​
​
​
​
These should be reduced in high foot traffic areas, areas supporting items such as air conditioning units or positioned to suit specific locations e.g. high wind zones.
​
​
​
​
