Roll-Formed to order and custom cut to your required length, and recommended maximum length of 8 metres. Standard Round-Top ridging is colour matched with Ali Edge.

Ideal For The Following Profiles:

• Corrugate
• Ribline

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®

130mm Legs with colour matched Ali Edge

Custom made to order and available in lengths up to 8 metres, Square-Top ridging is the ideal compliment for ribbed profiles and available with custom length legs to suit purlin location. Square-Top Ali-Edge ridging is available with colour matched Ali Edge.

Ideal For The Following Profiles:

• Styline
• Ribline

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

150mm Legs with colour matched Ali Edge

Custom made to order and available in lengths up to 8 metres, Square-Top Notched Ridging is the ideal compliment for ribbed profiles and available with custom length legs to suit purlin location.

Ideal For The Following Profiles:

• Styline
• NC710

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

150mm Legs turndown to suit profile i.e. 30mm for Styleline and 40mm for NC710.

Standard Valley Flashings are made to order in your required length up to 8 metres.

Ideal For The Following Profiles:

• Corrugate
• Ribline
• Styline
• NC710

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Most suited to the corrugate profile, Standard Barge Flashings are made to order in your required length up to 8 metres.

Ideal For The Following Profiles:

• Corrugate

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Custom Barge Flashings are made to order in your desired length up to 8 metres, and are commonly required for ribbed profiles or if specific barge detail is necessary, such as extra length down the face of the barge board/fascia.

Ideal For The Following Profiles:

• Corrugate
• Ribline
• Styline
• NC710

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Barge Roll Flashings are made to order in your desired length up to 3.6 metres and are most often used to match the existing barge flashings when renovations or additions are being done. Barge Roll was traditionally used with older Corrugated Iron/Galvanised roofing.

Ideal For The Following Profiles:

• Corrugate

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

A-Square Barge Flashings are made to order in your desired length up to 8 metres and are most often used to match the existing barge flashings when renovations or additions are being done.

Ideal For The Following Profiles:

• Corrugate
• Ribline
• Styline
• NC710

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Ali Edge Barge Flashings are made to order in your desired length up to 8 metres. The dimensions can be customised to meet your building requirements, such as purlin location or if extra length down the face of the barge board/fascia is required. Ali Edge Barge Flashings are available with colour matched Ali Edge.

Ideal For The Following Profiles:

• Corrugate
• Ribline

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Notched Barge Flashings are made to order in your desired length up to 8 metres. The dimensions can be customised to meet your building requirements, such as purlin location or if extra length down the face of the barge board/fascia is required.

Ideal For The Following Profiles:

• Styline
• NC710

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Turndown to suit profile i.e. 30mm for Styleline and 40mm for NC710

Most suited to the corrugate profile, Standard Apron Flashings are made to order in your required length up to 8 metres.

Ideal For The Following Profiles:

• Corrugate

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Custom Apron Flashings are made to order in your desired length up to 8 metres, and are commonly required for ribbed profiles but can be made with varying up-stand dimensions to meet your individual building requirements.

Ideal For The Following Profiles:

• Corrugate
• Ribline
• Styline
• NC710

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Ali Edge Apron Flashings are made to order in your desired length up to 8 metres. The dimensions can be customised to meet your building requirements, such as purlin location or if extra height on the up-stand is required. Ali Edge Apron Flashings are available with colour matched Ali Edge.

Ideal For The Following Profiles:

• Corrugate
• Ribline

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Notched Apron Flashings are made to order in your desired length up to 8 metres. The dimensions can be customised to meet your building requirements, such as purlin location or if extra height on the up-stand is required.

Ideal For The Following Profiles:

• Styline
• NC710

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Turndown to suit profile i.e. 30mm for Styleline and 40mm for NC710

Change-of-Pitch Flashings are made to order in your desired length up to 8 metres. The dimensions can be customised to meet your building requirements. Accurate dimensions for purlin location and roof pitch is essential for a successful COP Flashing.

Ideal For The Following Profiles:

• Corrugate
• Ribline

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Notched Change-of-Pitch Flashings are made to order in your desired length up to 8 metres. The dimensions can be customised to meet your building requirements. Accurate dimensions for purlin location and roof pitch is essential for a successful COP Flashing.

Ideal For The Following Profiles:

• Styline
• NC710

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Turndown to suit profile i.e. 30mm for Styleline and 40mm for NC710

Gutter Flashings, if required, are made to order in your desired length up to 8 metres. The dimensions can be customised to meet your roofing application.

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Chimney Flashings are made to order. The dimensions can be customised to meet your roofing application. Ali Edge can be used when Corrugate or Ribline is the roofing profile.

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Back Flashings, if required behind skylights, chimneys or roof penetrations, are made to order. The dimensions can be customised to meet your roofing application.

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Head Flashings, required for above windows or doors, are made to order in your desired length up to 8 metres. The dimensions can be customised to meet your building requirements.

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Sill Flashings, required for below windows, are made to order in your desired length up to 8 metres. The dimensions can be customised to meet your building requirements.

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Soffit Flashings, if required, are made to order in your desired length up to 8 metres. The dimensions can be customised to meet your building requirements.

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Internal or External Corner Flashings can be used for a variety of different applications and are made to order in your desired length up to 8 metres. The dimensions can be customised to meet your building requirements.

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium

Fence Cap Flashings are made to order in your desired length up to 8 metres. The top dimension varies relative to the profile used for the fence.

Available In:

• COLORSTEEL® MAXX™
• COLORSTEEL® ENDURA™
• ZINCALUME®
• GALVSTEEL®
• Aluminium